BluSystems
Description
SpeckAustralia.com is the official BluSystems pumps supplier and distributor for Speck in Australia and New Zealand. Speck Australia is a subsidiary of Speck Pumps of Roth, Germany who are high quality manufacturers of BluSystems pumps.
BluSystems Pumps Advantages
- Ready-to-connect modular system – developed for wet and dry calibration of plastic profiles
- Also suitable for condensate recovery
- Very high energy savings thanks to demand-driven vacuum generation
- Decentralised vacuum units with smart regulation and simple operation
- Can be retrofitted – simple installation in the place of existing vacuum pumps
- Automatic regulation and saving of parameters enables reproducible, consistently high quality of the end products
BluSystems Pumps Description
- Vacuum units comprising liquid ring vacuum pumps, motors with frequency converter, sensors and operating unit
- BluVacCompact also with integrated separator tank for extracting air/water mixtures
- BluVacD (BluVacDecentralised) for existing separator tanks/vacuum tanks in the system
- BluLine VB based on a side channel blower
- Control using standard operating panel or via PLC interface

BluVacCompact 
Vacuum units for extraction of air-water mixes
ISO
max. -930 mbar rel.
max. 105 m³/h output
min. 6 m³/h water discharge
US
max. -31 inch Hg g
max. 62 CFM output
min. 4 CFM water discharge

BluLine VN 
Vacuum units for extraction of air with high levels of water
ISO
max. -930 mbar rel.
max. 150 m³/h output
max. 4 m³/h water discharge
US
max. -31 inch Hg g
max. 88 CFM output
max. 2 CFM water discharge

BluLine VG 
Vacuum units for extraction of air with low levels of water
ISO
max. -930 mbar rel.
max. 145 m³/h output
max. 2.5 m³/h water discharge
US
max. -31 inch Hg g
max. 85 CFM output
max. 1.5 CFM water discharge

BluLine VB 
Vacuum units for extraction of moist air
ISO
max. -260 mbar rel.
max. 500 m³/h output
US
max. -9 inch Hg g
max. 294 CFM output

BluVacD 
Decentralized vacuum units for parallel extraction of air and water from a plant-side separator in the calibration table
ISO
max. 30 m³/h water discharge
US
max. 18 CFM water discharge