VE-165 – Liquid ring vacuum pump, single-stage, with mechanical seal
VE
VE series
For suction and compressor operation
Single-stage close-coupled pumps with mechanical seal and retrofit design
Phone 1300 207 380
Circutec Australia
Unit 2, 6 Glory Road
Gnangara WA 6077 Australia
Phone NZ: +61 8 6201 1286
- Description
- Markets and applications (examples)
- Technical data
- Dimensions
- Performance diagram
- Accessories
- Downloads
- Related links
- Videos
Description
- Liquid ring vacuum pump
- Close-coupled pump
- Mechanical seal
- Single-stage
- Pump with retrofit design for existing plants with modern hydraulics
- Eccentric at top
- Valve flaps
- Suitable for compressor operation
- Specially selected materials and seals for application-specific designs
- Oil-free vacuum generation
- Use of condensed process medium as the operating liquid
- Liquid carry over at a constant vacuum
Markets and applications (examples)
- Medical technology
- Steam sterilisation systems
- Lab autoclaves
- Plastics processing
- Wet and dry calibration of plastic profiles
- Extruder degasification
- Extruder compounding
- Polystyrene moulded parts processing
- Manufacturing of PET (?)
- Drying of plastic granulate
- Decontamination in PET recycling systems
- Food and beverage industry
- Beverage filling plants
- Vacuum cutters
- Sous-vide cooking
- Degasification
- Extraction
- Aspiration
- Sterilisers
- Milking robots
- Milking machines/plants
- Reverse osmosis systems
- Freeze-drying
- Chemical and pharmaceutical industry
- Filling plants for paste media
- Distillation
- Filtration
- Evaporation
- Degasification
- Drying of loose bulk materials
- Solvent recovery
Technical data
| Product type | Liquid ring vacuum pump |
| Stages | 1 |
| Shaft sealing | Mechanical seal |
| Pump design | Free-flying shaft |
| Typical media | Dry and moist gases |
| Variable speed | Frequency-converter-compatible motor on request |
| Suction pressure ext. | 33–800 mbar |
| Suction capacity | 18.0–190.0 m3/h |
| Motor current type | 3~ |
| Type of motor | Asynchronous motor |
| Nominal motor power | 4.0 – 5.5 kW |
| Nominal motor speed | 1450 rpm |
| Suction-side connection design | Flange in acc. with DIN EN 1092 and ANSI B 16.5 |
| Suction-side connection size | DN 50 |
| Pressure-side connection design | Flange in acc. with DIN EN 1092 and ANSI B 16.5 |
| Pressure-side connection size | DN 50 |
| Material designs | Grey cast iron |
| Explosion protection | None II 3G, II 3D II 2G, II 2D II 2/2G |
Dimensions
| L | 630–715 mm |
| W | 345 mm |
| H | 361–371 mm |
Performance diagram
Specifications apply for dry air at 20°C at nominal speed and operating water at 15°C.
Technical data
| Product type | Liquid ring vacuum pump |
| Stages | 1 |
| Shaft sealing | Mechanical seal |
| Pump design | Free-flying shaft |
| Typical media | Dry and moist gases |
| Variable speed | Frequency-converter-compatible motor on request |
| Suction pressure ext. | 33–800 mbar |
| Suction capacity | 16.0–235.0 m3/h |
| Motor current type | 3~ |
| Type of motor | Asynchronous motor |
| Nominal motor power | 6.2 – 8.2 kW |
| Nominal motor speed | 1750 rpm |
| Suction-side connection design | Flange in acc. with DIN EN 1092 and ANSI B 16.5 |
| Suction-side connection size | DN 50 |
| Pressure-side connection design | Flange in acc. with DIN EN 1092 and ANSI B 16.5 |
| Pressure-side connection size | DN 50 |
| Material designs | Grey cast iron |
| Explosion protection | None II 3G, II 3D II 2G, II 2D II 2/2G |
Dimensions
| L | 630–715 mm |
| W | 345 mm |
| H | 361–371 mm |
Performance diagram
Specifications apply for dry air at 20°C at nominal speed and operating water at 15°C.
Technical data
| Product type | Liquid ring vacuum pump |
| Stages | 1 |
| Shaft sealing | Mechanical seal |
| Pump design | Free-flying shaft |
| Typical media | Dry and moist gases |
| Variable speed | Frequency-converter-compatible motor on request |
| Suction pressure ext. | 1.0–23.6 inHg |
| Suction capacity | 9.4–138.3 CFM |
| Motor current type | 3~ |
| Type of motor | Asynchronous motor |
| Nominal motor power | 8.3-11.0 HP |
| Nominal motor speed | 1750 rpm |
| Suction-side connection design | Flange in acc. with DIN EN 1092 and ANSI B 16.5 |
| Suction-side connection size | DN 50 |
| Pressure-side connection design | Flange in acc. with DIN EN 1092 and ANSI B 16.5 |
| Pressure-side connection size | DN 50 |
| Material designs | Grey cast iron |
| Explosion protection | None II 3G, II 3D II 2G, II 2D II 2/2G |
Dimensions
| L | 630–715 mm |
| W | 345 mm |
| H | 361–371 mm |
Performance diagram
Specifications apply for dry air at 68 °F at nominal speed and operating water at 59°F.
- Separator
- Gas ejector
- Vacuum relief valve
- Drain valve
- Non-return ball valve